Operating Instructions - Triax GNS 20 Operating Instructions Manual

Operating Instructions

Terrestrial Multiband amplifier
UHF VHF III -
UHF VHF III VHF I
Description
GNS 20, 30 are low-noise multi-range
amplifiers with digital capability, four highly
selective range inputs and one output. For use
in all small and medium-sized common antenna
networks in which terrestrial signals must be
amplified.
High amplification and a high output level make
the GNS range of amplifiers suitable for both
DVB-T and analog antenna signals.
3 You can operate VHF III and UHF alternately
or common using the integrated jumper - e.g.
when using combination antennas.
3 Connectable +5 V remote supply to the UHF
or VHF III inputs - e.g. for supplying power to
active DVB-T antennas.
GNS 20
VHF I Out-
put
/FM
FM Out- GNS 30
put
GNS 20
Order No.
339120
GNS 30
Order No.
339130
3 Level controller 0...-20 dB at each input
3 Low power consumption
3 Low-noise inputs for DVB-T
3 The die-cast housing with cooling fins reduces
the component temperature and thereby
increases both service life and reliability
3 HF connections: F sockets, molded
3 Conforms to the standards EN 60065,
EN 50083-3, EN 50083-5,
5