Table of Contents
Advertisement
μIO-Stick User Manual
2 Overview
2
Overview
2.1
Description
The µIO-Stick is an interface device for controlling Infineon boards/kits during run time through PC. It enables
the connection between the evaluation board and USB for SPI programming and monitoring. Besides, it plugs
into the evaluation board via a standard 16-pin connector and allows easy interface to the microcontroller via
USB for communication through UART, SPI, LIN. It also implements GPIO ports, PWM generation up to 20 kHz
and an analog measurement interface (ADC).
Figure 1
µIO-Stick Overview
The µIO-Stick provide two exclusive functions:
1.
Infineon Embedded Power Fast LIN BSL Support
The Infineon Embedded Power devices provide a built-in boot strap loader (BSL), for programming the
embedded power devices over the built-in LIN transceiver or UART. The µIO-Stick acts as an interface
between the embedded power device and a PC. It handles the BSL protocols as well as the physical
layers. A PC application provides access to all BSL functions of the Embedded Power device.
Supported Embedded Power ICs:
•
TLE984x family
•
TLE986x family
•
TLE987x family
2.
Run-Time Control - Programming and Monitoring
The µIO-Stick connects the Evaluation Board with the computer. Via the ConfigWizard software – a
powerful and intuitive Graphical User Interface (GUI) – the user gets a customized programming,
monitoring and evaluation support for various Infineon Automotive Products.
Supported Devices:
•
System Basis Chip (SBC)
Application Note
4
v1.1
2018-09-18
Advertisement
Table of Contents
