Establish A Connection - Infineon mIO-Stick User Manual

μIO-Stick User Manual
5 Fast LIN BSL Support
5.2.4

Establish a Connection

Once the configuration has been completed, the connection to the target device can be established. If the µIO-
Stick is not connected to the PC system, the Connect button is shaded gray, as shown
Figure 13 BSL Tool - No µIO-Stick found
Once the µIO-Stick is recognized, by the BSL tool the connect button turns orange. By pressing the Connect
button, the BSL tool tries to establish a connection using the selected BSL interface and BSL protocol.
Figure 14 BSL Tool - Ready to connect to target system
Figure 15 on page 18 displays the connected state, the logging window states that the BSL communication has
been established, and the status bar at the bottom of the window shows "connected".
Application Note 17
Figure 13.
v1.1
2018-09-18