Configuration Dialog Box - Infineon mIO-Stick User Manual

μIO-Stick User Manual
5 Fast LIN BSL Support
Figure 10 BSL Tool - Expert Mode
5.2.3

Configuration Dialog Box

Before a BSL connection is established, the target device and the BSL interface and protocol have to be
selected. The Configuration block lists the currently selected target device, while the status bar at the bottom of
the window displays the selected BSL interface/protocol and baud rate. In order to change these settings, press
the Change button inside the Configuration block. Please also refer to
Application Note
Figure 11
15
on page 16.
2018-09-18
v1.1