General Installation Procedure - LG 6RWU0-05A Engineering Product Data Book

General Installation Procedure

1. General Installation Procedure
Installation Procedure
Determination of work scope
Selection of suitable location
for unit
Installation of Wall sleeve
Installation of indoor unit
Drain pipe work
Insulation works
Fit Outer Grille
Transfer charge to customer
51
......
Check and confirm required load calculation, model
selection etc...
......
The base or the foundation of the Air-Conditioner
should be firm and vibration proof and air-flow should
not be restricted on either side of the unit - front and
the back.
......
Check out the Wall opening to make sure the Wall
sleeve fits properly.
......
Check the size of the selected model and make sure
the fitting is made correctly.
......
Make sure the drain pipe is big enough and adjust it
to a downward gradient.
......
The Air-Conditioner supporting parts should secure
firmly to the wood, masonry and metal.
......
The Air Conditioner should be protected from
physical contact with animals or any external object.
......
Educate the customer or the operator on how
to operate the Air-Conditioner and the utility
of the manuals.
PTAC
Remarks
General installation guideline
6RWU0-05B