Specifications - Promax CompactMax-2 User Manual

6 SPECIFICATIONS

Specifications
SATELLITE INPUTS
LNB
Typical LO frequencies
Supply
22 kHz signalling
Indicators
IF frequency range
Input power range
Input Impedance
Input return loss
Noise figure
DVB-S
DVB-S2
DVB-T2 OUTPUTS
Carrier frequency
Output level
Output attenuation
MER
Channel bandwidth
FFT size
Guard Interval
Pilot pattern
Number of PLPs
Constellation
FEC
T2-frame duration
CONDITIONAL ACCES
TS PROCESSING
REMOTE CONTROL
MECHANICAL FEATURES
Dimensions
Weight
Size
POWER SUPPLY
OPERATING
TEMPERATURE
NOTE: Equipment specifications are set in these environmental operating conditions. Operation outside these
specifications are also possible. Please check with us if you have specific requirements.
* only available for CompactMax-2
22
CompactMax-2
4 satellite inputs
9750 MHz, 10600 MHz
External/+13 (vert.pol.)/+18V (hor.pol.), 5 W each satellite input (max.)
Low/high frequency band
Over/under load/current and malfunction
950 MHz to 2150 MHz (LNB LO freq ±downlink freq)
-70 to –20 dBm typ., -50 dBm nominal, -5 dBm max
75 Ω
> 10 dB
14 dB maximum
Up to 62 Msymb/s
Up to 45 Msymb/s
4 DVB-T2 outputs
47 MHz to 858 MHz in 1 kHz steps
-20 dBm ± 1 dB, 50 ohms
0 to 30 dB in 0.1 dB steps
38 dB minimum, >40 dB typical
8, 7, 6, MHz with selectable spectral inversion 2k only
2k only
1/32, 1/16, 1/8, 1/4, 1/128, 19/128, 19/256
PP1-PP8
1
16QAM, 64QAM, 256QAM (rotated or not)
Short, Normal; rates 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
125 ms
Two Common Interface DVB-CI compliant slots*
- Selection of arbitrary number of services from the received TS (bit rate of
the input services selected < DVB-T2 output bit rate)
- NULL packet deletion and PCR restamping
- Regeneration of the PAT, PMT, SDT, NIT tables
- User-defined NID, ONID, Network Name, LCNs with associated private data
specifier, Service Name, Provider Name and TS ID
1000 Mbps Ethernet connector to access a webserver
User-defined IP address
430 x 43 x 260 mm L x H x W
2.85 kg
3
4,807 cm
110 – 230 V AC
From 0 to 45 ºC
November 2018