5.6.4
Receivers
This window has some settings to tune the satellite signal. When the satellite
signal is locked, it shows information about it.
In first place, select satellite inputs (from 1 to 4) to work on and then expand the
data tree. Setting parameters are:
Disable: Check or uncheck to enable / disable the SAT input.
LNB frequency (MHz): Oscillator frequency of the antenna (in MHz). If
you have a Universal LNB, generally are 9750 MHz for LOW band and
10600 MHz for HIGH band.
Downlink frequency (MHz): Tuning frequency of the satellite.
Polarization: LNB voltage and band. Select from the available values:
•
13(VL): Vertical polarization Low Band.
•
18(HL): Horizontal polarization Low Band.
•
13~(VH): Vertical polarization High Band.
•
18~(HL): Horizontal polarization High Band.
•
External: External polarization.
The rest of parameters are automatically detected by the transmodulator when
the signal is locked.
November 2018
Figure 11.
15