Table of Contents
Advertisement
Receivers: It shows the status (enabled/disabled) for the 4 satellite
receivers. The radio button shows which one is working and its status:
green (ok) / red (error).
CI modules*: It shows the status (initialized/no card) for the CAM
module inserted in the common interface (CI) slot. It also shows the
satellite receiver selected and the number of selected services for each
card. The radio button shows which one is working and its status: (green
(ok) / red (error).
DVB-T2 modulators: It shows the status of the RF output (RF muted/...),
output frequency and signal source. The radio button shows which one is
working and its status: (green (ok) / red (error).
5.5
Edit options
Depending on the selected tab, edition options may vary.
Edit options are:
Refresh: It reloads data on the webserver application from data received
from the transmodulator.
Modify: Changes on the weserver are applied on the transmodulator.
Expand: It expands the data tree.
Collapse: It collapses the data tree.
Reset logs: It clears the log table.
* only available for CompactMax-2
10
November 2018
Advertisement
Table of Contents
