5.6
Setting parameters
Setting parameters are grouped in these tabs:
Versions/store: Information about firmware and hardware and options
to store/ reset/ reboot.
Control: Network, password and language settings.
Logs: Information about transmodulator operation.
Receivers: Satellite receivers settings.
CAM*: Conditional Access Module (CAM) settings.
Input Services: Information about services captured from satellite
receivers.
Output Services: Selection of services to be released on the RF output.
LCNs: Selection of logical channel number (LCN) for each service
selected.
DVB-T2 modulators: RF output settings to distribute in DVB-T2
standard.
In next chapters each one of these options are explained in detail.
* only available for CompactMax-2
November 2018
11