Introduction - Automatic Systems TR490 Installation Manual

1.

INTRODUCTION

We thank you for choosing the TR490 electrical tripod turnstile designed and manufactured by
Automatic Systems. We are confident that your purchase will fully meet your requirements.
However, in order to obtain maximum satisfaction from this equipment for a maximum period
of time, we strongly advise you to read this manual carefully before installing the equipment.
Although this manual has been prepared with great care, some information may seem
erroneous or unclear to you. In this case, please do not hesitate to contact us with your
remarks or questions.
B
CAUSE
UNACCOMPANIED YOUNG CHILDREN AS WELL AS TO
ANIMALS
 Automatic Systems
WARNING:
Y TR490
OUR TRIPOD TURNSTILE COMPRISES A
MECHANISM AND VARIOUS
. A
COMPONENTS NY NEGLIGENCE DURING AN
INTERVENTION IN THE MACHINE MAY SERIOUSLY
. A
ENDANGER YOUR SAFETY
,
THE HOUSING PUT OFF THE MAIN SWITCH
THE ELECTRICAL CONTROL LOGIC
. B
UNDER THE HOOD E CAREFUL IN HANDLING ANY
INTERNAL ELEMENT WHICH MIGHT BE UNDER POWER
OR COULD BE SET IN MOTION
W
HEN WORKING ON
:
RECOMMENDED
-
NOT TO DISCONNECT WIRES WITHOUT MARKING
;
THEIR TERMINALS
-
NOT TO REMOVE THE CONNECTOR WITHOUT
MARKING ITS PRECISE POSITION
IMPORTANT
ECAUSE OF THE SHOCKS THE TURNSTILE COULD
,
WE ADVISE YOU TO PROHIBIT THE ACCESS TO
.
TR490-NInstall-EN
ELECTRICAL
S SOON AS YOU OPEN
(2:1)
ON
(2:2),
LOCATED
.
,
THE CIRCUITS IT IS
3/16
p