Commodore 64 User Manual page 16

STEP 9
You now have one cable left, which is about
three feet long and resembles a hi-fi cable.
Connect one end of the cable to the bottom
of the TV/game switch box. Connect the other
end of the cable into the side of the modu
lator box.
Now go on to Step 12, under "Hooking Up
the Power Connector Box."
MAKING THE CABLE CONNECTIONS-
COMMODORE 64
STEP 10
You now use the cable that is about ten feet
long and resembles a hi-fi cable. Connect one
end of the cable to the bottom of the TV/
game switch box. Connect the other end of
the cable into the small hole to the left of the
video connector on the back of the 64.
STEP 11
Now locate the slide switch on the back of
the 64 that selects either Channel 3 or Chan
nel 4 on the TV. Slide the switch toward the
mark for the channel that is least used in your
area. Even if both are local stations, the com
puter will still work.
HOOKING UP THE POWER
CONNECTOR BOX
Once you hook up the power connector, your
computer should be ready to work.
STEP 12
First, locate the power connector box, which
has a cord attached to each end. One of the
cords is an ordinary electrical outlet plug. The
other end has a small connector that goes into
the side of the computer.
STEP 12—COMMODORE 64