Touchpad Basics
Tap the
touchpad
to wake up
the system.
Call (access
to Directory/
Favourites)
The Home screen should always be displayed prior to connecting to a site; if not, this may mean that a previous call was not disconnected. If you
do not see the Home screen, press End to disconnect prior to connecting to your site.
Camera Control and Selfview
Tap Camera
to invoke the camera
Tap the desired
adjustment menu.
Camera Preset.
Layout/selfview options
a
b
During a call:
then tap Selfview (b) to turn it on
(you may now resize the selfview
image or control the camera)
Far End Control Site to Site/Layout multi-site
Tap Participants
, tap the participant, then tap Camera. (Fig 1)
Fig 1
Site to Site:
Adjust the camera using the pan/tilt arrows and
zoom +/-. Tap outside the box to return to near end. (Fig 2)
Multi-site:
Use the Up/down arrows to scroll through the layout
options. Tap outside the box to return to near end. (Fig 2)
Rev 25Sept2018
Camera -
camera settings
and Selfview
option
Volume
Mute/unmute
Microphone
Turn Selfview
On and Off.
Maximize/minimize
Selfview.
Zoom in and out.
(+/-)
Pan/tilt controls.
(arrows)
Tap Camera (a) and
Fig 2
www.mbtelehealth.ca
Quick Reference Guide
Touchpad 10 -
Service Desk 204-940-8500 Option 4
or toll-free 1-866-999-9698 Option 4
Scroll in lists like
a smart phone.
Tap outside the
menu to exit.
Make a Call
Site to Site Call
1
1. Tap Call.
2. Tap in the search/dial field and enter the 5 digit number
using the keypad. (Tap the keypad icon
left corner of the screen if required.)
3. Tap Call to connect.
Out of Province/Network Calls
1. Tap Call.
2. Tap in the search/dial field and enter the phone number
using the keypad. (Tap the keypad icon
left corner of the screen if required.)
3. Tap Call to connect.
Multi-Site (MCU) Call
You will be automatically connected (see note on back)
Press End to disconnect at the end of every call (Site to Site and MCU).
Share Presentation
During a call
Tap Share and then tap Share in call.
Stop sharing:
Tap Share and then tap Stop Sharing.
SX10/20/80, Room Kit Plus
Tap a button to
activate its function.
Press, drag and release
to move a box.
2
3
Keypad icon
... ...
in the bottom
... .
... ...
in the bottom
... .
Outside a call
Tap Share and then
tap Share again.
Page 1 of 2