Sony MW1 Startup Manual

Smart Wireless Headset pro__A7-Print_EN_1250-7823 1 (2).pdf 1 of 2
Introduction
Startup guide
Smart Wireless Headset pro is a multifunctional
Bluetooth™ stereo headset. You can use the
English
headset with your phone to:
• Handle calls
• Display text messages, emails and calendar
event reminders
• Get text messages, emails and calendar event
reminders read out loud
• Stream music
• Perform other basic tasks
You can also use the headset with another
Bluetooth™ compatible device to stream music.
When not connected to another device, Smart
Wireless Headset pro functions as a stand-alone
MP3 player and FM radio.
Compatibility information and a User guide for
your accessory are available at
www.sonymobile.com/
SmartWirelessHeadsetpro
Smart Wireless Headset Accessory overview
pro
2
1
14
MW1
1 Next key
Sony Mobile Communications AB
SE-221 88 Lund, Sweden
www.sonymobile.com
2 Music key/Select
key
1250-7823.1
January 18, 2012 15:32:43
3 Previous key Press to go to the
previous menu item, the
previous track, or the
previous FM frequency.
Press and hold down to
scan for a lower radio
frequency.
4 Back key/Menu Press to open or close the
key menu, or to go back one
step.
5 Micro USB port Insert a charger or a USB
cable to charge the
battery or transfer files.
6 Cap
7 microSD™ card
slot
8 Clip
9 Display
10 Action key Press to answer incoming
calls and open incoming
text messages (only
available for Android™
phones).
Press and hold down to
reject incoming calls and
open the call log (only
available for Android™
6
5 phones).
4
3
11 Power key Press for five seconds to
turn on/off the headset.
When the headset is
turned off, press for 15
seconds to reset the
7
headset.
12 Headset
connector (3.5
mm input)
13 Microphone
8
14 Volume controls Press to adjust volume.
Press and hold down to
9 adjust volume in larger
increments.
10
Basics
Charging the battery
11
12
13
Before using Smart Wireless Headset pro for the
first time, you need to charge it for approximately
2.5 hours. Use Sony and/or Sony Ericsson
chargers only.
Press to go to the next
menu item, the next track,
or the next FM frequency.
Press and hold down to
scan for a higher radio
frequency.
Play/Pause latest media
used, and select menu
items.
To charge the battery
Getting started with an
Android™ phone
Pairing the headset with
an Android™ phone
To use the headset with an Android™ phone, you
need to first pair the headset with the phone. After
successful pairing, the headset connects
automatically to the phone as soon as the headset
is turned on and within range.
To enter pairing mode
1 Turn on the headset.
1 Remove the cap from your Smart Wireless
2 Press the Menu key
Headset pro device.
3 Press the Next key
2 Plug the charger into a power outlet.
select the settings icon
3 Plug one end of the USB cable into the charger
key .
(or into the USB port of a computer).
4 Press the Next key
4 Plug the other end of the cable into the Micro
select Bluetooth devices, then press the Select
USB port on your Smart Wireless Headset pro
key .
device.
5 Press the Next key
select Pairing, then press the Select key
Turning on and off
If the headset is not already paired with a
Bluetooth™ compatible device, it
automatically enters pairing mode after
To turn on the headset
starting up.
• Press and hold down the power key until the
display turns on.
To pair the headset with a phone
1 Phone: Under Settings, tap Wireless and
To turn off the headset
Networks > Bluetooth. The Bluetooth™
• Press and hold down the power key until the
function is now enabled.
display turns off.
2 Headset: Enter pairing mode.
3 Phone: Tap Bluetooth Settings > Scan for
Selecting a music source
devices, then tap Smart Wireless Headset pro
in the Bluetooth devices list.
4 When a Bluetooth™ pairing request appears,
Before playing music, you need to select a music
tap Pair on your phone and press the Select key
source. The headset can play music from the
on your headset.
following sources:
5 After the headset is successfully paired with your
• The FM radio. Android™ phone, the time appears on the
• The microSD™ card in your headset. headset display, which should look similar to the
• A paired Bluetooth™ compatible device, following illustration:
1
such as a phone or a computer. is the same as that displayed on your phone. A
phone icon also appears on the headset display,
Access the microSD™ card and Bluetooth™
indicating that your phone is paired and
music sources by first selecting .
connected.
To select the music source
Installing necessary
1 Turn on the headset.
2 Press the Menu key to open the menu.
applications
3 Press the Next key or the Previous key to
select the icon for the music source you want to
use.
To get the most out of your headset together with
4 Press the Select key .
an Android™ phone, you need to download the
LiveWare™ manager application to your phone
from Android Market™. You also need to install
the Smart Wireless Headset pro application. If you
don't install these applications, you can not take
full advantage of the headset's functions.
To install the LiveWare™ manager
application
1 From your phone's main application menu, find
and tap Market to open the Android Market™
application.
2 On the Android Market™ application screen, tap
the search icon at the top right corner and
search for "liveware manager".
3 Tap LiveWare™ manager.
4 Tap the Download button, then tap Accept &
Download.
To install the Smart Wireless Headset pro
application
1 Make sure you have LiveWare™ manager
installed on your phone.
2 Pair the headset with your phone.
3 Follow the instructions that appear on your
phone display to install the Smart Wireless
Headset pro application.
What can I do with an
Android™ phone?
to open the menu.
or the Previous key to
, then press the Select
After pairing the headset with your phone, you can
or the Previous key to
perform a range of tasks with your headset. For
example, you can answer and make calls, and
keep track of incoming events such as emails and
or the Previous key to
text messages. You can also play the FM radio
.
and other music, as well as open different
applications and edit settings.
Call handling
Use the headset to manage your calls. The name
and number of a contact linked to a call is shown
on the headset display. You can also use the
headset call log to make calls.
To answer a call with the headset
• When you hear an incoming call signal, press the
Action key .
To make a call from the headset call log
1 Press any key to turn on the headset display,
then press and hold the Action key to open
the call log.
2 Press the Next key or the Previous key
select the contact or number that you want to
. The time displayed
call, then press the Select key .
1
3 When Call? appears on the headset display,
press the Next key or the Previous key
select , then press the Select key to
make the call.
Event notifications
You can receive event notifications on the display
of your headset. Smart Wireless Headset pro
supports the following event types:
• Text messages
• Email
• Calendar event reminders
To view event notifications on the headset
• When a notification arrives, press the Action key
.
Using Text to speech
When notifications arrive, you can choose to have
the related event information read out loud to you
in the headset. For example, you can listen to
email or text messages, or calendar reminders. To
use the Text to speech function, you first need to
turn it on. Refer to the online User guide for your
accessory for more information.
The Text to speech function does not support
all languages.
Menu options
When paired and connected to an Android™
phone, the following menu appears on the headset
display:
You can go in to different menu options to:
• Play the FM radio.
• Play music from different sources, such as a
microSD™ card or Bluetooth™ compatible
devices.
• Use different applications.
• Edit settings.
To open the menu
• Press any key to turn on the headset display,
then press the Menu key .
To navigate the menu
1 After you open the headset menu, press the
Next key or Previous key to navigate the
different menu options.
2 Press the Select key to open the menu
option that you have selected, or press the Back
key to go back one step.
Adding new functionality
to
Download and install applications from Android
Market™ to your phone and add new functionality
to your Smart Wireless Headset pro device. For
example, you can download and install the Find
to
Phone - Smart Extras™ application which enables
you to trigger the ringtone of your phone through
the Smart Wireless Headset pro device.
To install applications for your headset
from Android Market™
1 From your phone's main application menu, find
and tap LiveWare™ manager > Smart
Wireless Headset pro.
2 Tap Smart Wireless Headset pro, then tap
Applications.
3 Tap Search for applications or tap an
application name under My applications.
4 Follow the instructions that appear on your
phone screen.
You can find installed applications under the
menu option indicated by in the headset.