Table of Contents
Advertisement
Other materials (mortar, tile, etc.)
R Do not use the included screws.
R Consult the builder or licensed professional
regarding the type of anchor appropriate for
the installation location and materials.
R Do not install on gypsum board or concrete
blocks.
Installing the front door camera
Attach the wall mounting adaptor to a porch
wall.
R Secure the wall mounting adaptor to the
wall by tightening the 3 supplied screws
(A).
1
Remove the lock key of the button cover
(B) on the bottom of the camera.
2
Open the button cover (C).
3
Slide the power switch to ON (D).
R When adjusting the installation angle
of the camera, use the spacer between
the wall mounting adaptor and wall as
necessary.
1
2
3
4
Close the button cover (E) and the lock
key (F). Attach the camera to the wall
mounting adaptor.
Note:
R Make sure to close the button cover
securely. Water resistance cannot
be assured if the button cover is
open.
For assistance, please visit http://shop.panasonic.com/support
HN7001_(en_en)_1228_ver.030.pdf 27
5
Removing the front door camera
Rotate the camera away (A) from the wall,
and then pull it away (B) from the wall
mounting adaptor.
1
1
Installing the outdoor camera
1
4
2
R When attaching the camera to the wall
mounting adaptor, match the positions
of the hooks (G).
R Rotate the camera until you hear a
click and the camera is securely
mounted.
7
7
6
1
Open the button cover (A), and then
slide the power switch to ON (B).
Secure the screw safety wire to the screw
hole (C) of the camera using a driver,
Setup
7
7
2
27
2017/12/28 16:21:53
Advertisement
Table of Contents
