Panasonic KX-HN7001 Installation Manual page 26

Homehawk front door homehawk front door/outdoor
Hide thumbs Also See for KX-HN7001:
Table of Contents

Advertisement

Setup
Poor example
No support behind exterior surface
1
Open space, no support
2
Siding
Ideal example
Structure supports exterior surface
2
Siding
Structure behind siding
3
Concrete
R Do not use the included screws. Use screw
anchors (screw ø4 mm (
designed for concrete walls.
R Carefully read the instructions supplied with
the anchors. Follow instructions regarding
drill bit diameter, hole depth, etc.
R Drill a pilot hole. Remove any debris after
drilling the pilot hole.
For assistance, please visit http://shop.panasonic.com/support
26
HN7001_(en_en)_1228_ver.030.pdf 26
1
1
2
2
3
3
4
2
ALC (autoclaved lightweight cellular
concrete)
R Depending on the type of ALC panel, you
may not be able to attach the camera.
Consult the ALC panel manufacturer.
R Do not use the included screws. After
consulting the manufacturer of the ALC
5
/
inches))
panel, use only commercially-available
32
metal screw anchors (screw ø4 mm
(
R Carefully read the instructions supplied with
the anchors. Follow instructions regarding
drill bit diameter, hole depth, etc.
R Drill a pilot hole. Remove any debris after
drilling the pilot hole.
R Seal the pilot hole with a
commercially-available waterproof sealant.
Mark the hole depth on the drill bit (
and then drill a pilot hole.
1
Remove debris.
Insert an anchor, tighten the screw, then
remove the screw to secure the anchor.
Insert the screw and tighten it.
2
Camera mounting stand
2
5
/
inches)) designed for ALC panels.
32
)
1
2017/12/28 16:21:53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-hn7002Kx-hn7003Kx-hn1007

Table of Contents