Beckett GeniSys 7505 Specification Sheet

Advanced Burner Control

Product Description

The Beckett GeniSys™ Advanced Burner Control is a 120 Vac primary safety control for residential and light commercial oil burners used
in boiler, furnace, and water heater applications. The GeniSys is used with a suitable cad cell fl ame sensor to control the oil burner motor,
igniter, and optional solenoid valve. It has 24 Vac thermostat terminals (if applicable) compatible with both mechanical and many power
stealing thermostats. It can provide interrupted or intermittent duty ignition, and it has a 15-second lockout time.
Features & Benefi ts
• Thermostat and boiler control compatible
• Customizable pre-time and post-time
• Three status lights for system monitoring and diagnostics
• Welded relay protection with redundant motor relays
• Limited reset and limited recycle
• Sleek, modern design
• Cad cell resistance indicator
• Technician Pump Prime mode
• 5-Year Warranty
• Two communication ports for adding alarm contacts, programming display,
and/or future wireless communications
Add a GeniSys Display and GeniSys Lockout Alarm
to fully utilize the features of the GeniSys advanced burner control.
To learn more, see www.beckettcorp.com or ask for literature pt. nos. 61669 & 61687
7505
●
The GeniSys Display (Pt. No. 52067) allows a technician to monitor and program the
primary control variables. The display shows current burner status, control timings, and
burner cycle history. The display's programming mode allows a technician to customize both
the pre-time and post-time settings and a lockout service message.
• 32 character backlit alphanumeric display
• Sealed pushbutton keypad
• Low voltage operation
• Continuous real-time cycle monitoring
• Continuous cad cell resistance reading
• Continuous AC line voltage read-out
• Real-time error notifi cation
The GeniSys Lockout Alarm (Pt. No. 52040) functions as the interface between the primary
control and an existing alarm panel or any alarm mechanism requiring contact closure in the
event of a soft or hard lockout of the GeniSys Control.
PARTS & ACCESSORIES
• Customizable pre-time (valve-on delay) &
post-time (motor off delay)
• 15 cycle history monitoring
• Five Year Warranty
• Customizable lockout service message