i.
Primary Notification Type
to the Central Station (CS).
ii.
Primary CS Phone Number
including the dashes: XXX-XXX-XXXX.
iii.
Primary CS Account #
c. In the
Notification Control
i. Make sure
ii. Set
This prevents Arm/Disarm signals from passing to your central station.
iii. To prevent reporting on any other options in the
the value to NO in that specific row. To enable, set the value to YES.
Uplink Dealer Portal
RG1227 – Uplink Remote Installation Guide – 5500EZ
– This is the format the unit will use when transmitting
– This is the standard 10-digit phone number value
– Enter the last four digits.
section:
Notification Enabled
Notify on Input 2 Alarm?
is set to YES (1).
to NO
(2)
and
Notify on Input 2 Normal
Notification Control
to NO (3).
section, set
Page 7 of 14
©2018 Sierra Wireless