Networx - Sierra Wireless Uplink Remote 5500EZ Installation Manual

2. Keyswitch:
To assign a Keyswitch
a. With the display showing KEYSWITCHSENSOR n (current sensor number), enter the
desired sensor number (01-24). The display flashes the entered sensor number.
b. Press ƒ and the display will show the new number.
3. PGM:
To program output # 2 for state go to location 09110 segment 01710 program a 009 for arming
stay and away.

Networx

1. These systems usually require momentary keyswitch inputs.
2. Keyswitch:
Program the zone type in location 25 for the desired zone in its segment 1-8 as an 11
Zone.
3. PGM:
Select a PGM to use from location 47 = output 1, 48 = output 2, 49 = output 3, or 50 = output 4.
Pick one of the outputs and Program a 21 in the first segment and a 0 in the second.
Zone doubling and partitioned systems are NOT supported by
Installation Tips
RG1227 – Uplink Remote Installation Guide – 5500EZ
Sensor:
Keyswitch
Uplink Remote.
Page 13 of 14
©2018 Sierra Wireless