Table of Contents
Advertisement
a. Select
Standard Remote Dealer Base
recommended for residential).
b. Click the
c. For alarm systems using a
i. Panel Arm Command (Keyswitch Zone): Select
duration of the pulse (Recommend 2 Seconds).
ii. Panel Disarm Command (Keyswitch Zone): Select
desired duration of the pulse
d. For alarm systems using a
iii.
Panel Arm Command
Select
Select Close for panels using a closed zone to arm.
iv.
Panel Disarm Command
Select
e.
Panel Armed Indicator
v. If the PGM output is High (12V) while Armed, Select
vi. If the PGM output is Low or open on Armed, select
Uplink Dealer Portal
RG1227 – Uplink Remote Installation Guide – 5500EZ
Update
button.
Pulse
Maintained
(Keyswitch Zone):
Output 2
OFF for panels where an open Keyswitch Zone causes arming.
Output 2
ON or OFF as required by the Keyswitch Zone.
(PGM Output):
or
Advanced Remote Dealer Base
or
Momentary
Keyswitch Zone:
Output 2 Pulse
or
Latching
Keyswitch Zone:
(Keyswitch Zone):
(standard plan
and the desired
Output 2 Pulse
and the
Input 2 Alarm
Detected.
Input 2 Restored to
Normal.
Page 5 of 14
©2018 Sierra Wireless
Advertisement
Table of Contents
