Table of Contents
Advertisement
d. In the
Notification Data
i. Make sure that the numeric codes and alarm zones are labeled the way you want
them to be. Code, Text, or
be.
ii. Test Intervals and Alarms/Restores are controlled not by dip switches, but by
MT's (mobile terminates or pings).
To change test intervals login: Select
air.
e. Configure other unit settings to your install needs and click Update.
7. Go to
Programming
a. Under
Event
Select
Send Alarms and Restores
cellular service).
8. Log on to
Uplink Remote
a. To access the
i. If you're logged in to the
Uplink Dealer Portal
RG1227 – Uplink Remote Installation Guide – 5500EZ
section:
Once the unit is updated you will need to set the settings on the unit
for
Uplink
Remote.
/
Program Unit
Over-the-Air:
Reporting:
and click
to create a
New Account
Uplink Remote
website do one of the following:
Uplink Dealer
Zone
information can all be keyed in differently if need
Programming
then select
Send
(5500EZ must be powered up and have
and enter Uplink Remote Settings.
Portal:
Program Unit Over the
Page 8 of 14
©2018 Sierra Wireless
Advertisement
Table of Contents
