Reset To Factory Settings; Software Version; Nmae Out: On/Off; Exit Level - Mastervolt Masterlink BTM III User Manual

RESET TO FACT.
PRESS SET 3S
Select
SOFTWARE VER.
0.00
Select
NMAE OUT.
OFF
Select

EXIT LEVEL

PRESS SET
Select
Back to lock mode
EN / Masterlink BTM-III / November 2006

10.17 RESET TO FACTORY SETTINGS

Here all settings will be reset to the original factory settings when Set is held for
three seconds.

10.18 SOFTWARE VERSION

This level shows the installed software version; this value cannot be changed

10.19 NMAE OUT: ON/OFF

See chapter 11.9.
Factory setting: OFF
10.20 EXIT LEVEL
From here you can return to the main menu (chapter 6) by pressing Set shortly.
Also, if none of the buttons was touched for 60 seconds, the Masterlink BTM-III
returns to the main menu.
SETTINGS MENU
27