YUNEEC Mantis Q Quick Start Manual page 4

First Flight Part 1
1.Installing the Smart Device
Pull out the Install the
phone holder smart phone
2.Power On
To power on the Mantis Q and the remote controller, press
and hold the power button for two seconds until you hear
two rising tones.
Power on the Mantis Q
Connect the smart phone
with the remote controller
(
Iphone and Android cable
not included)
Power on the controller
3.Connecting to Mantis Q
• Launch Yuneec Pilot App.
• Follow on screen directions to connect phone
or controller to the aircraft.
• For manual connection through WiFi,
the password is:1234567890.
4.Take Off
• To ensure safe flight, step back approximately 9ft
(3m) behind the Mantis Q.
Option 1
Tap the icon [ ] on the app and then slide to take off.
Option 2
• Move the sticks for 1.5 seconds as shown below to
start the motors.
• Slowly raise Left Stick to take off.
Start the motors. Take off