Sanyo PLV-75 Owner's Manual page 36

PICTURE IMAGE
4
To move a red frame pointer to "MENU", and then press the
SELECT button. The COLOR MANAGEMENT menu will be
exited and the display will return to the IMAGE ADJUST menu.
(At this time, the image will stop being paused and normal pro-
jection will resume.) After changing the COLOR MANAGE-
MENT settings, use the IMAGE ADJUST menu to store the
changed settings.
COLOR SELECTION MODE
COLOR M.
The mode will return to the pointer mode (even if you press the
MENU key on the projector or the remote control). (You will need to
reselect and re-adjust the color in this case.)
MENU
The COLOR MANAGEMENT menu will be exited and the display will
return to the normal projection screen, but any settings that have
been changed will not be stored. To store the changed settings, be
sure to select "LIST" using the POINT buttons and change to the
next mode (LIST mode).
LIST MODE
The check mark will be cleared and the effect of the setting adjustment
for that line on the projected images will be momentarily canceled.
COLOR PALETTE
The mode will return to COLOR SELECTION mode so that you can
re-adjust the setting for the color in that line. This option is not avail-
able if the check mark has been cleared by the operation immediate-
ly above.)
DEL
The setting adjustment for the color in that line will be canceled.
ALL DEL
The setting adjustment for the colors in all lines will be canceled.
COLOR M.
The mode will return to POINTER mode.
Auto picture control
Press either POINT LEFT button or POINT RIGHT button to Auto
picture control position that you want to select . (Off, L1 or L2)
Off ······· Auto picture control OFF position.
L1 ········ Auto picture control LEVEL 1 position.
L2 ········ Auto picture control LEVEL 2 position.
36
COLOR SELECTION
MODE
Level and phase
adjustment palette.
LIST COLOR M.
LIST MODE
COLOR PALETTE
ALL DEL
MENU
NOTE;
If you press the COLOR M. button on the remote
control, the COLOR MANAGEMENT menu will be
exited and the display will return to the normal
projection screen, but any settings that have been
changed will not be stored. To store the changed
settings, be sure to select "MENU" using the
POINT buttons and store the settings.
Gamma
adjustment palette.
MENU
DEL
COLOR M.