Table of Contents
Advertisement
COMPUTER MODE
This projector has a picture screen resize function, which enables you to display the desirable image size.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SCREEN
box PICTURE SCREEN Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
2
appear. Move the arrow to the function that you want to select
and then press SELECT button.
True
To make the image into its original size select True in the dialog box.
When the original image size is larger than the screen size (1024 x
768), this projector enters Digital Zoom mode automatically.
Keystone
When the image is distorted vertically, select Keystone in the dialog
box. The ON-SCREEN menu and SCREEN ADJUST menu
disappears and the message "Keystone" is displayed. Correct the
Keystone distortion by pressing the KEYSTONE
POINT UP/DOWN button(s).
on page 20.
Digital Zoom
To adjust the image size or pan the image, select Digital zoom in the
dialog box. The ON-SCREEN menu and SCREEN ADJUST menu
disappears and the message "D. Zoom" is displayed.
This projector also enters Digital Zoom mode by pressing the
D.ZOOM
/
button on the Remote Control Unit.
Refer to the following for operation.
Expand function
To expand the image size, press the D.ZOOM
SELECT button. The image is magnified by degrees.
Compress function
To compress the image size, press the D.ZOOM
RIGHT CLICK button. The size of image is reduced by degrees.
Panning function
To pan the image, press the POINT UP/DOWN/LEFT/RIGHT buttons.
Panning function can work only when the image is larger than the
screen size.
To cancel Digital Zoom mode, press any button except D.ZOOM
/ , SELECT, RIGHT CLICK, or POINT button. To adjust the image
to 1024 x 768, press NORMAL button.
This projector cannot display any resolution higher than 1280 X
1024. If your computer's screen resolution is higher than 1280 X
1024, reset the resolution to the lower before connecting the
projector.
The image data in other than XGA (1024 x 768) is modified to fit
the screen size in the initial mode.
The normal "Panning Operation" may not function properly if the
computer system prepared with the "PC Adjust" is used.
28
PICTURE SCREEN ADJUSTMENT
and press the SELECT button. Another dialog
Refer to KEYSTONE ADJUSTMENT
NOTE : The True and the Digital Zoom cannot be
/
button or the
button or the
button or the
Move the arrow to the
function and press the
SELECT button.
operated when "RGB," "HDTV1035i" or
"HDTV1080i" is selected on the SYSTEM
MENU (P22 and 23).
Advertisement
Table of Contents
