Remote Control Batteries Installation - Sanyo PLC-XW15 Owner's Manual

KEYSTONE BUTTON
Used to correct the
keystone distortion.
(P20, 28, 30)
MUTE BUTTON
Used to mute sound.(P21)
NO SHOW BUTTON
Used to turn the picture
into black image. (P21)
AUTO IMAGE BUTTON
Use to operate AUTO
IMAGE function. (P27)

Remote Control Batteries Installation

Remove the battery
1
compartment lid.
Press the lid down-
ward and slide it.
To insure safe operation, please observe the following precautions :
Use (2) AA, UM3 or R06 type alkaline batteries.
Replace two batteries at the same time.
Do not use a new battery with a used battery.
Avoid contact with water or liquid.
Do not expose the Remote Control Unit to moisture, or heat.
Do not drop the remote control unit.
If batteries have leaked on the remote control, carefully wipe the case clean and load new batteries.
ON-OFF
KEYSTONE D.ZOOM VOLUME
Used to adjust volume.
(P21)
D.ZOOM BUTTON
MUTE COMPUTER
Used to select DIGITAL
ZOOM mode and resize
VIDEO the image. (P28)
MENU
P-TIMER
FREEZE BUTTON
Used to freeze the picture.
NO SHOW FREEZE
(P21)
AUTO IMAGE NORMAL
NORMAL BUTTON
Used to reset to normal
picture adjustments preset
by the factory. (P26, 31)
Slide the batteries into the
2
compartment.
BEFORE OPERATION
VOLUME BUTTON
Replace the compartment
3
lid.
Two AA size batteries
For correct polarity (+
and –), be sure the
battery terminals are in
contact with the pins in
the compartment.
15