Indicators And Projector Condition - Sanyo PLC-XU46 Owner's Manual

APPENDIX
Check the Indicators for projector condition.
Indicators
LAMP
WARNING
REPLACE TEMP.
yellow
✽
✽
✽
✽
✽
• • • on
When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow,
✽
replace the projection lamp with a new one promptly. Reset the Lamp Replace Counter after replacement of the lamp.
42

INDICATORS AND PROJECTOR CONDITION

READY LAMP
green red
red
• • • flashing • • • dim
Projector Condition
The projector is OFF. (The AC Power Cord is unplugged.)
The projector is READY to be turned on with the POWER
ON-OFF button.
The projector is operating normally.
The temperature inside the projector is abnormally high. The
projector cannot be turned on. When the projector is cooled
down enough and the temperature returns to normal, the
READY indicator lights green and the WARNING TEMP. indi-
cator goes off. Then the projector can be turned on.
The projector is being cooled down. It cannot be turned on until
the READY indicator lights green.
The projector is in the Power management mode.
• • • off