Table of Contents
Advertisement
BASIC OPERATION
Press the ZOOM button on the Top Control or the ZOOM L/M
1
button on the Remote Control. The message "Zoom" is
displayed.
Press the ZOOM L button or the POINT UP button to make
2
image larger, and press the ZOOM M button or the POINT
DOWN button to make image smaller.
Press the FOCUS button on the Top Control or the FOCUS L/M
1
button on the Remote Control. The message "Focus" is
displayed.
Adjust focus of image by pressing the FOCUS L/M button or
2
the POINT UP/DOWN button(s) .
If the projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
1
Press the KEYSTONE button on the Remote Control or select
Keystone in the SETTING menu. (Refer to page 34.) The
keystone dialog box appears.
2
Correct keystone distortion by pressing the POINT
UP/DOWN/LEFT/RIGHT button(s). Press the POINT UP button
to reduce the upper part of the image, and press the POINT
DOWN button to reduce the lower part. Press the POINT LEFT
button to reduce the left part, and press the POINT RIGHT
button to reduce the right part.
Reduce the upper width
with POINT UP button.
Press the FREEZE button on the Remote Control to freeze the picture
on-screen. To cancel the FREEZE function, press the FREEZE button
again or press any other button.
20
ADJUSTING SCREEN
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
KEYSTONE ADJUSTMENT
Reduce the lower width
with POINT DOWN button.
PICTURE FREEZE FUNCTION
Message disappears after 4 seconds.
Message disappears after 4 seconds.
• The arrows are white when there is no
correction.
• The direction of the arrow being corrected turns
red.
• The arrow(s) disappear(s) at the maximum
correction.
Reduce the left part with
POINT LEFT button.
Zoom
Focus
Reduce the right part with
POINT RIGHT button.
Advertisement
Table of Contents
