Table of Contents
Advertisement
Setting
Fan
This function provides the following options in the cooling
fans' operation when the projector is turned off (p.23).
L1....... Normal operation
L2....... Slower and lower-sound than the normal operation
(L1), but it takes more time to cool the projector
down.
Fan control
Choose the running speed of cooling fans from the following
options.
Normal ..... Normal speed
Max.......... Faster than the normal speed.
Warning log
This function records anomalous operations while the
projector is in operation and use it when diagnosing faults.
Up to 10 warning logs are displayed with the latest warning
message at the top of the list, followed by previous warning
messages in chronological order.
✔
Note:
•When the Factory default function is executed, all the warning log
records will be deleted.
Lamp counter
This function is used to reset the lamp counter.
When the lamp life is left less than 100 hours, the Lamp
replacement icon appears on the screen, indicating that the
end of lamp life is approaching.
When replacing the projection lamp, reset the lamp counter.
See "Resetting the Lamp Counter" on page 66.
56
Fan
This icon appears on the screen when the end of
lamp life is approaching.
✔
Note:
•The Lamp replacement icon will not appear
when the Display function is set to "Off" (p.48),
during "Freeze" (p.28), or "No show" (p.29).
Advertisement
Table of Contents
