Table of Contents
Advertisement
NO SHOW button
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. When a projected
image is captured and set as "User" in the Logo selection
(see page 49), the screen changes each time you press the
NO SHOW button as follows.
black out ➜ the captured image ➜ normal ➜
P-TIMER button
Press the P-TIMER button on the remote control. The P-Timer
display "00:00" appears on the screen and the countdown
starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
IMAGE button
Press the IMAGE button on the remote control to select a
desired image mode of the screen. For more detail, see
pages 36, 43.
"No show" disappears after 4 seconds.
• • • • •
P-Timer display
Remote Control
✔
Note:
•See the previous page for the description of
other buttons.
Basic Operation
NO SHOW button
P-TIMER button
IMAGE button
29
Advertisement
Table of Contents
