Section 1 Introduction; Precautions; Safety Warnings And Iec Symbols - Omega RH-USB User Manual

Section 1 - Introduction
Please read this manual completely before installing and operating your USB
based probe, connector, or pressure transducer.
It's important to read and follow all notes, cautions, warnings and safety
precautions before operating this device.

1.1 Precautions

1.2 Safety Warnings and IEC Symbols

This device is marked with international safety and hazard symbols in
accordance with IEC standards. It is important to read and follow all precautions
and instructions in this manual before operating or commissioning this device as
it contains important information relating to safety and EMC. Failure to follow
all safety precautions may result in injury and or damage to your device. Use of
this device in a manner not specified will void your warranty
IEC symbols
• This device is not designed for use in medical or nuclear applications.
• Do not operate this device in flammable or explosive environments.
• Do not operate this device outside of the recommended use outlined in
this manual.
There are no user serviceable parts inside your device. Attempting to repair or
service your unit may void your warranty:
NOTE:
Description
Caution, refer to accompanying documentation
EU's Waste Electrical and Electronic
Equipment Compliance
Figure 1-1. IEC Symbols
1
Introduction
1-1