Operating With Projector Control - Sanyo PLC WM5500L Owner's Manual

Sanyo multimedia projector user manual

Hide thumbs

Table Of Contents

Table of Contents

Lens Operation

The following lens operation can be made with the Lens button on

the side control.

Press the LENS button to enter each lens operation mode. The

selected adjustment display appears on the screen.

Zoom → Focus → Lens Shift →

Zoom Adjustment

Display Zoom on the screen. Use the Point ▲▼ buttons to

zoom in and out the image.

Focus Adjustment

Display Focus on the screen. Use the Point ▲▼ buttons to

adjust focus of the image.

Lens Shift Adjustment

Display Lens shift on the screen. Use the Point ▲▼◄►

buttons to position the screen to the desired point without having

picture distortion.

The screen can be moved up or down to 60 percent, or sideways

up to 10 percent from the central axis of the lens shift.

Press and hold the LENS button for more than 5 seconds to

return to the central position.



Note:

• The arrow disappears at the maximum lens shift in each

direction.

• The arrows turn red when the lens shift comes to the

center position of the screen.

Shutter Function

Shutter function allows you to completely block out light to the

screen. Press the SHUTTER button to close the shutter inside

the projector. To open up the shutter, press the SHUTTER button

again. Refer to p.63 for detail of setting for the Shutter function.



Note:

• The SHUTTER button on the side control and the remote

control cannot be effective when Shutter Protection is On in the

Setting menu. (p.63)

• The SHUTTER indicator on the projector's top lights blue when

the shutter is closed. (pp.12, 79)

• The projector will shut down automatically when the set time on

shutter management has passed. (p.63)

• The Power management function does not work when the

shutter is closed. (p.59)