Installation; Positioning The Projector; Lens Shift Adjustment - Sanyo PLC WM5500L Owner's Manual

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. (for
PLC-WM5500)

Note:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
11.8' (3.6 m)
4.5'(1.4 m)
40"
Screen Size
(W x H) mm
16:10 aspect ratio
Zoom (max.)
Zoom (min.)
Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function
makes the positioning of images easy on the screen. (See page 27)
The display position
can be shifted upward
up to 60% elevation of
the display.
When the lens is shifted to top.
The display position can
be shifted to the left in
up to 10% width of the
display.
When the lens is shifted to leftmost.

Installation

Positioning the Projector

80.1' (24.4 m)
47.2'(14.4 m)
35.4'(10.8 m)
23.6' (7.2 m)
200"
100"
125"
63"
40" 100"
862 x 538 2154 x 1346
4.5'(1.4 m)
11.8' (3.6 m)
7.9'(2.4 m)
19.7' (6.0 m)

Lens Shift Adjustment

The display position can
be shifted downward up
to 60% low level of the
display.
When the lens is shifted to bottom.
The display position can
be shifted to the right in
up to 10% width of the
display.
When the lens is shifted to rightmost.
Max. Zoom
400"
300"
Min. Zoom
250"
188"
(Center)
200" 300"
4308 x 2692 6462 x 4039
35.4'(10.8 m) 47.2'(14.4 m)
23.6' (7.2 m)
40.0' (12.2 m)
60.0' (18.3 m) 80.1' (24.4 m)
Lens shift adjustable range
Lens shift center position
(Inch Diagonal)
400"
400"
8616 x 5385
60%
10%
Shift range
17