Image Adjustment - Sanyo PLC WM5500L Owner's Manual

1 Press the MENU button to display the On-Screen Menu.
▲▼
Use the Point buttons to select Image adjust and
►
then press the Point
▲▼
Use the Point buttons to select the desired item

and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Contrast
Press the Point ◄ button to decrease the contrast; press the Point
► button to increase the contrast (from 0 to 63).
Brightness
Press the Point ◄ button to decrease the brightness; press the
Point ► button to increase the brightness (from 0 to 63).
Color temp .
Use the Point ◄► buttons to select the desired Color temp. level
(XLow, Low, Mid or High).
White balance (Red)
Press the Point ◄ button to lighten red tone; press the Point ►
button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point ◄ button to lighten green tone; press the Point ►
button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point ◄ button to lighten blue tone; press the Point ►
button to deepen blue tone (from 0 to 63).
Offset(Red/Green/Blue)
Press the Point ◄ button to lighten red/green/blue tone of the black
level of an image; press the Point ► button to deepen red/green/
blue tone of the black level of an image.
Sharpness
Press the Point ◄ button to decrease the sharpness of the image;
press the Point ► button to increase the sharpness of the image
(from 0 to 31).
Gamma
Use the Point ◄► buttons to adjust the gamma value to obtain a
better balance of contrast (from 0 to 15).

Image Adjustment

or button.
the SELECT
◄►
buttons to
Image adjust Menu
Contrast
Brightness
Color temp.
Red
Green
Blue
Offset
Sharpness
Gamma
Reset
Store
Selected Image mode
Use the Point
buttons to adjust the
setting value.

Note:
When White balance Red, Green or Blue is
adjusted, Color temp. will change to Adj..
Computer Input
32
32
High
28
32
35
8
8
◄►
41