Image Mode Selection - Sanyo PJ LINK PLC-XU106K Owner's Manual

Image Mode Selection

Direct Operation
Select the desired image mode among Dynamic, Standard,
Real, Blackboard (Green), Colorboard, Image 1, Image ,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
select and then press the Point
button.
 ▲▼
Use the Point buttons to select the desired item
and then press the SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Colorboard
►
Press the Point button at Colorboard, and then use the
▲▼
Point buttons to switch the desired item and then press
the SELECT button.
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Image 1–4
For viewing with the user preset image mode in the Image
adjust Menu (see pages 36-37). This Image memory is
provided in each computer, component, S-video and Video
input source.
▲▼
buttons to select Image
►
or the SELECT
Remote Control
IMAGE button
Image Select Menu
Computer Input
IMAGE button
Dynamic
Standard
Real
Blackboard (Green)
Colorboard
Image 1
Image 
Image 3
Image 4
35