Video Input; Video System Selection - Sanyo PDG-DHT100L Owner's Manual

Video System Selection

1
Press the MENU button to display the On-Screen Menu.
Use the Point 7 8 buttons to move the red frame pointer
to the AV System Menu icon.
2
Use the Point ed buttons to move the red arrow pointer
to the desired system and then press the SELECT button.
Video jack or S-Video jack
Auto
The projector automatically detects an incoming video system,
and adjusts itself to optimize its performance.
PAL/SECAM/NTSC/NTSC4 .4/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select
a specific broadcast signal format from among PAL, SECAM,
NTSC, NTSC 4.43, PAL -M, and PAL -N.
y, Pb/Cb, Pr/Cr jacks
Auto
The projector automatically detects an incoming video signal,
and adjusts itself to optimize its performance.
When the Video System is 1035i or 1080i, select the system
manually.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a
specific component video signal format from among 480i, 575i,
480p, 575p, 720p, 1035i, 1080p, and 1080i.
✔ Note:
• The AV System menu cannot be selected when
selecting RGB(Scart).
4

Video Input

AV SySTEM MENU (VIDEO OR S-VIDEO)
AV SySTEM MENU (COMPONENT VIDEO)
AV System Menu icon
The selected system is displayed
Move the pointer to the desired
system and press the SELECT button.
AV System Menu icon
The selected system is displayed.
Move the pointer to the desired
system and press the SELECT button.