Computer Input Source Selection - Sanyo PDG-DHT100L Owner's Manual

Computer Input Source Selection

Menu Operation
When Selecting the INPUT 1 with DVI/D-sub 15 terminals
1 Press the MENU button to display the On-Screen Menu.
Use the Point 7 8 buttons to move the red frame pointer
to the INPUT Menu icon.
2
Use the Point ed buttons to move the red arrow pointer
to the desired input and then press the SELECT button.
Then you can switch to the desired input.
3
Press the select button again. The Source Select Menu
appears.
4
Use the Point ed buttons to select the desired source
and then press the SELECT button.
RGB (PC analog)
When your computer is connected to the INPUT 1 (ANALOG)
terminal, select RGB (PC analog).
RGB (PC digital)
When your computer is connected to INPUT 1 (DIGITAL)
terminal, select RGB (PC digital).
When Selecting the INPUT  with 5-BNC/Video/S-video terminals
RGB
When your computer is connected to the INPUT 2 (5 BNC
INPUT JACKS) terminal, select RGB.
✔ Note:
• When a slot is empty, the input is displayed in grayout.
INPUT MENU
Input Menu icon
Move the pointer (red arrow) to Input
1 and press the SELECT button.
Input 1
INPUT MENU
Input Menu icon
Move the pointer (red arrow) to Input
2 and press the SELECT button.
Input 
Input Selection
Source Select Menu
Move the pointer (red
arrow) to the desired source
and press the SELECT
button.
Source Select Menu
Move the pointer (red
arrow) to RGB and press the
SELECT button.