Table of Contents
Advertisement
3 in 1 Function (Mulching, Side-discharge, Rear-discharge)
This Lawn Mower can be retrofitted from its normal function, based on the
application purpose from Lawn Mower with Rear Discharge to Mulching Mower
or as Side-discharge Mower.
What is mulching?
When mulching, the grass is cut in one working step, then finely chopped and
returned to the grass strip as natural fertilizer.
Hints for mulch-mowing:
•
Regular cut-back by max. 2 cm from 6 cm to 4 cm grass height.
•
Use a sharp cutting knife.
•
DO NOT mow wet grass.
•
Set max. motor speed.
•
Only move at walking pace.
•
Regularly clean mulching plug, housing inner side and mowing blade.
Starting operation
Note: The number in front of the text (e.g.3) refers to the figures.
Retrofitting for mulching plug
Only when motor and cutter are at standstill!
•
Lift the discharge flap and remove the grass catcher chute.
•
Push the mulching plug into the discharge channel. Lock the mulching plug
with housing—the nose on the bottom side of mulching wedge grip must
snap into the opening on the housing. (Picture 1 and 2)
•
Lower the discharge flap again.
Resetting for side-discharge mowing
Only when motor and cutter are at standstill!
•
Lift the discharge flap and remove the grass catcher.
•
Mount the mulching plug. (see Mulch Mowing)
•
Lift rear flap for side discharge. (Picture 3 and 4)
•
Mount the discharge channel for side discharge on the support pin of the rear
flap. (Picture 5)
•
Lower the rear flap—the rear flap lies on the Discharge channel. (Picture 6)
Mowing with the grass catcher chute
For mowing with the grass catcher, remove the mulching plug and discharge
channel for side discharge and mount the grass catcher.
Removing the mulching wedge:
Only when motor and cutter are at standstill!
•
Lift discharge flap and remove the mulching wedge by unlocking on the
housing and removing it. (Picture 7)
Removing the discharge channel for side discharge
Only when the Engine has stopped and blade has stopped rotating!
•
Lift rear flap and remove discharge channel. The rear flap automatically closes
the discharge opening on the housing by means of spring force.
•
Regularly clean the rear flap and discharge opening from grass and dirt
buildup.
BBT-LM-SPBSES
OPERATIONS
WWW.BBTA.COM.AU
13
Advertisement
Table of Contents
