Table of Contents
Advertisement
•
All mowers are delivered without oil. Add 0.6 litres of oil before starting the
engine.
•
Before using the machine you must read the Engine instruction book.
Engine Starting
Once the machine has been set up properly, start the engine as follows:
•
Put the lever on the START position or
•
Hold lever handle (3) and maintain it against the superior handle, Turn the ignition key fully to the right in
the ignition lock. As soon as the motor starts running, release the ignition key.
•
Put the lever on RUN position or
Blade is in action as soon as engine is started. While the machine is working, maintain the security handle (3) in
working position. The engine will stop as soon as you release the engine control bar.
The Self Propelled Function
To engage the self-propelled system, pull on the inferior lever
of the handle and maintain it engaged together with the
brake lever. fig H
Gear Box
Check frequently the self-propelled system. Polish the gear in the wheels and put grease on them. Do the same
check on the ball bearing if any.
12
WWW.BBTA.COM.AU
OPERATIONS
CAUTION
.
Engine control bar (3)
Pour Avancer
BBT-LM-SPBSES
Advertisement
Table of Contents
