Advertisement
Maintenance, cleaning and care
Attention:
Disconnect the mains plug prior to every adjustment,
maintenance measure or repair!
Every device is dirtied by dust when working with wood.
Cleaning is therefore essential. To ensure a long service
life, however, the machine should be cleaned with a soft
cloth or brush after each use.
Mild soap or other suitable cleaning agent may be used
in this context. Solvents or cleaning agents containing al-
cohol (e.g. petrol, cleaning alcohols, etc.) should be
avoided, since these can attack plastic casings.
The apertures required for cooling the motor must always
be kept free of dust and dirt.
Accessories
For more detailed information on accessories, please re-
quest our device catalogue from the address specified
on the last page in the warranty information.
Please note in general:
Proxxon bits and cutters have been designed to work with
our machines, which makes them optimal for their use.
We will not assume any liability whatsoever for the safe
and proper function of our devices when using third-party
bits and cutters!
Service note
Please note: The mains power input may only be replaced
by our Proxxon Service Department or a qualified spe-
cialist!
Disposal
Please do not dispose of the device in domestic waste!
The device contains valuable substances that can be re-
cycled. If you have any questions about this, please con-
tact your local waste management enterprise or other
corresponding municipal facilities.
- 16 -
Note:
EC Declaration of Conformity
Name and address of the manufacturer:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation:
Article No.:
In sole responsibility, we declare that this product
conforms to the following directives and normative
documents:
• EU EMC Directive 2014/30/EC
DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 01.2016
DIN EN 61000-3-2 / 03.2015
DIN EN 61000-3-3 / 03.2014
• EU Machinery Directive 2006/42/EC
DIN EN 60745-1 / 01.2010
DIN EN 60745-2-23 / 11.2013
Date: 17.05.2017
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with
the signatory.
FBS 240/E
28472
Advertisement
