Prepare 4 Blocks/Support For The Frame In The Bedroom; Place The Bedframe Carefully On Top Of The 4 Blocks; Push Together Bedframe And Headboard; Tighten All The 16 Screws At The Underside Of The Bedframe - RotoBed Care Manual

Prepare 4 blocks/support for the frame in the Bedroom.

Place the bedframe carefully on top of the 4 Blocks (in each corner)
Push together bedframe (backrest-end) and headboard (with two
tubes C)). Now push together bedframe and footboard.

Tighten all the 16 screws at the underside of the bedframe.

Make sure that the parts are pushed together and horizontal.
C)
C)
(15-20 cm high)
Block/support
D)