Edit Devices - LEGRAND QMotion User Manual

1. To configure your devices, open
the navigation menu and select
Edit Devices. Use the tabs to
display shades or miscellaneous
devices. If any remotes have
been added to your network, they
will appear under misc. Tap on a
device to begin editing.
4. To delete the device, select the
device and tap on the trash icon.

EDIT DEVICES

2. The details page displays device
information. The Information section
displays details about the device such as
battery level, network info, and various
diagnostic data. The Actions section allows
you to:
Identify: Physically jogs shade
Raise: Raises shade to its maximum limit
Lower: Lowers shade to its minimum limit
Refresh: Refreshes to the current shade values
5. Confirm the delete. This will
remove the device from the hub.
9
3. Set Upper/Lower Limit: Refer
to Setting Limits Section for
details.
6. Alternatively, to delete from the list
page, you can swipe or long press
to delete. This will remove the
device from the hub. To delete the
device, select the device and tap
on the trash icon.