LEGRAND QMotion User Manual page 10

1. Tap on the Edit Misc to go to the
list view of available extenders
and remotes.
EDIT DEVICES - RANGE EXTENDERS AND REMOTES
2. Swipe or long press to access the
rename or delete options. Deleting
will prompt a confirm delete.
In the Settings page you may rename the QzHub. It also displays the
activation key used to authorized additional/other devices.
HUB ACTIONS
Check For Updates: Update QzHub firmware if available
Authenticate: Enable authentication mode for 60 seconds, allowing
additional devices to register the hub
Email System Info: Send system info to Email for integration
Locate: Hub will beep for 10 seconds
Reboot: Hub will reboot by power cycling
Delete Hub: Hub will be removed from device. Will require
reauthentication of device
INFO
Other data regarding the QzHub including IP addresses, firmware
versions, and ZigBee channels
Rename: Rename the hub to desired name
Activation Key: Alphanumeric sequence used to activate and
authenticate the QzHub
SETTINGS
10
3. To rename, tap Rename, edit
name and save changes by
tapping OK.