1. DESCRIPTION CONTENTS Page The portable Luxmeter is fitted with a large LCD display which optimally displays Description the measured values. The Luxmeter measres and records illuminance (PHOT) in Operating elements and display units of Lux (lx). Description of the functions...
1.1 OPERATING ELEMENTS AND DISPLAY 1.2 DESCRIPTION OF THE FUNCTIONS The Luxmeter keypad consists of single-function keys, except the ON-OFF / Auto-OFF key that has two functions (see description opposite). When you press a key, you will hear a short 'beep' as confirmation; a longer 'beep' will sound if the wrong key is pressed.
As long as the device is switched on, the MAX, MIN and AVG values re- Important: connect the probe before turning on the power. The Luxmeter auto- main in the memory, even after exiting the DATA calculation function. These values are matically detects the probe when it is turned on.
Storage conditions: • Temperature: -25…+65°C. • Humidity: less than 90%RH without condensation. Do not store the Luxmeter in a places where it may be exposed to: • high humidity Replacing the batteries: • direct sunlight 1.
Unit of measurement lx – Lux Part number 134056* * Kit includes 1 x Luxmeter, 1 x Probe LM-PHOT and 3 x 1.5V alkaline batteries, all in a case. 3.2 PHOTOMETRIC PROBE Illuminance measurement probe (PHOT) complete with SICRAM module...
Before disposal, ensure that the power supply to the meter is disconnected. Conform with the local regulations and disposal guidelines. Rechargeable batteries, dry batteries and button cells are hazardous waste; they pose risks to health and the environment. If you have any questions about disposing of this device, contact Magnaflux.