coNteNts 3.5 Power oFF time The POWER OFF TIME menu option allows you to set an automatic timer to power the meter down, in order to conserve battery power. The power off timer may be introduction set between 0 and 15 minutes. If the power off time is system components set at 0, the meter will never turn itself off.
1. iNtroDUctioN 3.2 maiN meNU Enter the menu system by pressing the accept button. The UVe-LUX is a compact, lightweight and robust meter specifically designed for the Once in menu-mode, use the up and down button to non-destructive testing environment. The meter is a dual white-light (WL) and ultra-violet scroll through menu items and press the Accept button (UV) meter designed to give simultaneous readings of both WL and UV.
3. DisPlaY 2. sYstem comPoNeNts In normal operation, when the unit is powered up, The system consists of a sensor housing containing both the WL and UV sensors, and the first screen to appear is the logo screen, followed the meter housing containing the main system components such as the screen, battery by the splash screen.
Page 6
2.4 Batteries 2.3 BUttoNs The UVe-LUX is powered by two AA type, rechargeable batteries. You can access the on/off button: batteries by unscrewing the screw holding the battery housing cover on the rear of the meter housing, and removing the cover. It is important to insert the batteries in the correct Press this button (while the unit is off) to switch the UVe-LUX on orientation as marked in the battery compartment, otherwise damage may occur to the Hold down this button (while the unit is on) to switch the UVe-LUX off...