Sanyo DWM-4500 Instruction Manual page 8

Inserting batteries
1
Note:
Remove the batteries if the remote control is not to be used for a
month or more. Batteries left in the unit may leak and cause
damage.
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE
RECYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE
WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL
COUNTY SOLID WASTE AUTHORITY.
Remote control range
Remote sensor
30°
2
Two "AA" batteries
(not supplied)
Within approx. 20 feet
(6 meters)
30°
To set the remote control code for TV
This remote control can operate the basic functions of TVs made
by the manufacturers listed below.
To enter the remote control code for your brand of TV, follow the
steps below.
1. In the chart below, find the code corresponding to your brand
of TV.
2. While holding down [TV POWER], enter the 2-digit code
using the number buttons [0 - 9], then release [TV POWER].
• The remote control is now set to operate your TV.
TV brands
ADMIRAL
EMERSON
FISHER
GE
GOLD STAR
HITACHI
JVC
MAGNAVOX
MATSUSHITA
MITSUBISHI
PANASONIC
QUASAR
RCA
SAMSUNG
SANYO
SHARP
SONY
TECHNOL ACE
TOSHIBA
ZENITH
Notes:
• Only remote-controlled TVs can be operated using this remote
control. (Refer to your TV instruction manual for more details.)
• There may be some TV models that cannot be operated with
this remote control. If this is the case, use the original remote
control supplied with the TV.
IMPORTANT NOTE:
If the batteries in the remote control are changed, the code
settings for the TV must be re-entered.
Write your code number below for future reference.
TV:
Note:
This remote control cannot operate your VCR.
-E7-
Code
05, 10, 13
17
03
07
01
02
15
08
12, 18
14
12, 18
12, 18
06
16
03
00, 13
11
05
04
09, 10