Table of Contents
Advertisement
8.
Installing the Appliance in the 2‐Post Rack
•
Align the inner fixed chassis rails on the appliance with the fixed chassis rack rail assemblies previously installed
in the rack.
•
Carefully slide the appliance into the rack rails until you hear the locking tabs on the chassis rails click into place.
•
Push the appliance all the way into the rack until it stops.
•
Secure the unit in the rack by inserting and tightening two 10‐32 x 3/4" Phillips pan head screws, one on each side.
Two 10-32 x 3/4"
NetSpective Web Filter
*
•
16Hi Hardware Installation Guide
NOTE:
When removing the appliance
from your rack, you will need to press
down on the locking tab in order to
release it from the rack. Carefully
slide it out supporting the unit on
both sides at all times.
Page 10
Advertisement
Table of Contents
