Advertisement
Description of variables not defined in CiA 301
Large_Display_Length: This is the length of the large text display in characters. This should be hard-coded
Large_Text_Char_1: This is the ASCII code for the first (leftmost) character to be placed on the large
Large_Text_Char_2: This is the ASCII code for the second character to be placed on the large 3-character
Large_Text_Char_3: This is the ASCII code for the third (rightmost) character to be placed on the large
Small_Display_Length: This is the length of the small text display in characters. This should be hard-coded
Small__Text_Char_1: This is the ASCII code for the first (leftmost) character to be placed on the small
Small__Text_Char_2: This is the ASCII code for the second character to be placed on the small 6-character
Small__Text_Char_3: This is the ASCII code for the third character to be placed on the small 6-character
Small__Text_Char_4: This is the ASCII code for the fourth character to be placed on the small 6-character
Small__Text_Char_5: This is the ASCII code for the fifth character to be placed on the small 6-character
Small__Text_Char_6: This is the ASCII code for the sixth (rightmost) character to be placed on the small
backlight_percent: The backlight PWM duty cycle in percent.
Hourmeter value: The value of the internal hourmeter in 0.1 hour increments.
Hourmeter enable: The enable signal for the internal hourmeter. 0 = disabled; 1 = enabled.
Hourmeter reset: The reset signal for the internal hourmeter. A non-zero value will reset the hourmeter to
BDI_percent: The current battery state-of-charge estimate in percent.
BDI_prescaler: The prescaler value for the state-of-charge integrator.
BDI_discharge_full: The "full" parameter for the discharge curve, in mV per cell.
BDI_discharge_empty: The "empty" parameter for the discharge curve, in mV per cell.
BDI_CTR_full: The "full" parameter for the charge-tracking-reset curve, in mV per cell.
4 — DEVICE PARAMETER OBJECTS
to a value of 3.
3-character display, if selected in Byte 1 of the Command_Word.
display, if selected in Byte 1 of the Command_Word.
3-character display, if selected in Byte 1 of the Command_Word.
to a value of 6.
6-character display.
display.
display.
display.
display.
6-character display.
zero hours.
Curtis 3140 Manual – Nov. 2017
pg. 11
Hide quick links:
Advertisement
