Tamarack Technologies HV1600 WR38 Companion Manual

Wi-Fi/RF Control Set Up Instructions – Companion Manual for the HV1600 Model WR38/WR50
Devices that must be present to control the Wi-Fi fan
• An active 2.4GHz b/g/n wireless home network (Not compatible with 5.0GHz)
•
A Smart Device. You may also use Alexa or Google Home and a smart device to control the fan without the need
to log in to regain control each time
•
EWelink app is used to operate the fan by providing the wireless network information to the Wi-Fi Control.
Compatible smart devices
•
A smart phone or tablet that has access to iTunes or Google Play to download the EWelink app. Once the setup
process is complete you may use other smart phones and tablets. Generally, only one device can be signed in at
one time to control the fan (Exception: If you have more than one EWelink account and you share control)
Before setting up the Wi-Fi control, check the following:
Your control box is disconnected from the fan
Your smart phone or tablet is connected to a 2.4 GHz Wi-Fi network with internet access
You have the correct Wi-Fi password
Your phone or tablet has access to iTunes or Google Play
Your router is MAC - open
1. Set up EWelink app
Scan the QR code to download the free EWelink APP and user guide or search for "EWelink"
EWelink app on iTunes
2. Sign into or register your EWelink account
IMPORTANT: Perform these tasks before the fan has been
installed. To connect the Wi-Fi receivers to the home
network, disconnect the control box from the fan and
provide power to the control box ONLY.
EWelink app on Google Play EWelink detailed user guide