Fitting An Aquamaster Sensor Socket - ABB CalMaster2 Instruction Manual

Field and Software Tools
CalMaster2 and CheckMaster

3.3.3 Fitting an AquaMaster Sensor Socket

B
Fig. 3.8 Fitting an AquaMaster Sensor Socket
To fit an AquaMaster sensor socket:
1. Turn off the power to the AquaMaster and remove the covers – see Section 3.3.2, page 12.
Disconnect and withdraw the sensor cable A.
2.
Remove and discard the gland B.
3.
Feed the socket lead into the AquaMaster and fit the socket (MGFA0609-S) C.
4.
Connect the sensor cable D.
5.
6. Replace the covers – see Fig. 3.7, page 12.
IM/VCM2 Issue 6
Pin 1 Brown
Pin 2 Red
Pin 3 Orange
Pin 4 Yellow
Pin 5 Green
Pin 6 Blue
Pin 7 Violet
A
1
D
7
3 Installation
C
13