Argo POLIFEMO Operating Instructions Manual

Argo POLIFEMO Operating Instructions Manual

Evaporative air cooler

Advertisement

EN
EVAPORATIVE AIR COOLER
OPERATING INSTRUCTIONS
Read the instructions carefully before operating the appliance or carrying out maintenance operations.
Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage.
Keep these instructions in a safe place for future reference. 
 
 
 
V 01/12
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POLIFEMO and is the answer not in the manual?

Questions and answers

Summary of Contents for Argo POLIFEMO

  • Page 1 EVAPORATIVE AIR COOLER OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage. Keep these instructions in a safe place for future reference.   ...
  • Page 2: General Safety Information

    GENERAL SAFETY INFORMATION  Only use this appliance as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.  Make sure that the type of mains power complies with the electrical requirements of the appliance (230 V~/50 Hz). ...
  • Page 3: Description Of Parts

    Turn the switch off and unplug before carrying out To disconnect the appliance, press the OFF button any maintenance work or moving the appliance. and unplug from the socket. Only pull on the plug. Always unplug from the socket when the appliance is Do not pull the cord.
  • Page 4: How To Use The Appliance

    HOW TO USE THE APPLIANCE The appliance does not need to be installed. Position the unit on a flat, stable surface and connect the power cord to a suitable power socket (230 V~): you will hear a sound to indicate that the appliance is in standby and can be switched on using the START/SPEED button. The unit can be switched off using the OFF button.
  • Page 5: Remote Control

    LED DISPLAY Fan speed display 1 (low)- 2 (medium) - 3 (high) Cooler/Humidfier mode display Fan mode display (Sleep, Natural) Timer display (0.5 - 7.5 hrs) REMOTE CONTROL The remote control has six membrane buttons whose functions are identical to those on the control panel (already illustrated in detail).
  • Page 6: Filling The Water Tank

    FILLING THE WATER TANK FILLING THE WATER TANK THE TANK MUST BE FILLED WITH DEMINERALIZED WATER FOR THE APPLIANCE TO OPERATE IN COOLER/HUMIDIFIER MODE. Water level indicator Counter-rotate the tank knob by 90° and remove it from its slot; fill it with demineralized water, up to the maximum level mark. Reposition the tank and turn the knob.

Table of Contents